Stacoat

STAC-U

STAC-U-Systems are 1-c (1-component) U1 or 2-c (2-components) U2 or 1+2-c (2-components) U12, based on specific ISO (poly-isocyanates). For U1 it reacts with water to form poly-Urea. For U2 it reacts with poly-amines to form poly-Urea or with polyols to form poly-Urethanes or with a mixture of both to form hybrid poly-Urea-Urethane. The pure poly-Urea (aminen) have better properties than the poly-Urethanes (polyols) and the hybrids, with a.o. superior durability and higher, long lasting elasticity. The U12 has the most extreme UV resistance and colour stability.



STAC-U1

STAC-U1-Systems are pure poly-Urea, 1-c (1-component), resulting from the reaction of specific ISO (poly-isocyanates) with water, even atmospheric moisture, to form MCU (Moisture Cured Urea). No additives, no mixing errors, no induction time and no potlife. They are applied independent of temperature (–12 to +50°C) and air humidity (15 to 99 %) and tolerate a damp surface (no condensation or ice crystals) which is moderately roughened, even with UHP water jet. The thin layer coatings (standard 75-100 µm) cure quickly. With the addition of STAC-U1-ACCELERATOR, the curing is even faster (up to 75 %) and the overall quality even better. They protect durable all kind of constructions, combining strong adhesion, excellent chemical resistance, outstanding abrasion and impact resistance with high flexibility and elasticity (± 30 %).

Properties

Application

Certificates

Chemical resistance

The story of U
Examples



Universal primers
STACPRIMER-U1-HISO TDS SDS  
STACPRIMER-U1-ALUMIO TDS SDS  

Steel primers
STACPRIMER-U1-ZIMIO TDS SDS  

Intercoats
STACOAT-U1-ALUMIO TDS SDS  
STACOAT-U1-ZIMIO TDS SDS  

Coating-membranes
STACOME-U1-COLDFLEX TDS SDS  
STACOME-U1-COLDFLEX-T TDS SDS  

Topcoats - interior
STACOAT-U1-TOPIN TDS SDS  

Topcoats - exterior
STACOAT-U1-TOPEX TDS SDS  

Accelerators
STAC-U1-ACCELERATOR TDS SDS  
STAC-U1-ACCELERATOR-S TDS SDS  

Thinners
STAC-U-THINNER TDS SDS  
STAC-U-THINNER-S TDS SDS  




STAC-U2

STAC-U2-Systems are 2-c (2-components), based on the poly-addition reaction of specific ISO (poly-isocyanates) with poly-amines to form poly-Urea or with polyols to form poly-Urethanes or with a mixture of both to form hybrid poly-Urethane-Urea. The pure poly-Urea (aminen) have better properties than the poly-Urethanes (polyols) and the hybrids, with a.o. superior durability and higher, long lasting elasticity. The U12 are 1+2-c (1+2-components), based on the dual reaction of specific ISO (poly-isocyanates) with both water and PEPA (Poly-Ester–Poly-Amines) to form PEPU (Poly-Ester–Poly-Urea). They have the most extreme UV resistance and colour stability.

Properties

Application

Certificates

Chemical resistance

The story of U

Examples



Universal primers
STACPRIMER-US2 TDS SDS A SDS B

Floors
STACFLOOR-U2 TDS SDS A SDS B
STACFLOOR-US2 TDS SDS A SDS B

Coating-membranes: hot spray
Universal
STACOME-U2-HOTFLEX-S TDS SDS A SDS B

Ultra elastic
STACOME-U2-HOTFLEX-SER TDS SDS A SDS B

Anti-static
STACOME-U2-HOTFLEX-SAS TDS SDS A SDS B

Low viscosity
STACOME-U2-HOTFLEX-SLV TDS SDS A SDS B
STACOME-U2-HOTFLEX-HLV TDS SDS A SDS B

Fire retardant
STACOME-U2-HOTFLEX-SFR TDS SDS A SDS B

Coating-membranes: cold applied
STACOME-U2-COLDFLEX TDS SDS A SDS B

Topcoats
STACOAT-U2-TOPEX TDS SDS A SDS B
STACOAT-U2-TOPEX-HISO TDS SDS A SDS B
STACOAT-U2-TOPEX-S TDS SDS A SDS B
STACOAT-U2-TOPEX-SP TDS SDS A SDS B
STACOAT-U12-TOPEX TDS SDS A SDS B
STACOAT-U12-TOPEX-LP TDS SDS A SDS B

Thinners
STAC-U-THINNER TDS SDS  
STAC-U-THINNER-S TDS SDS